A1.1 |
Metric Practice Guide for the Welding Industry. |
A2.1-DC & WC |
Welding Symbols Chart (Desk & Wall Chart). |
A2.4 |
Standard Symbols for Welding, Brazing, and Nondestructive Examination. |
A3.0 |
Standard Welding Terms and Definitions. |
A4.2M/A4.2 |
Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal. |
A4.3-93R |
Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding. |
A4.4M |
Standard Procedures for Determination of Moisture Contents of Welding Fluxes and Welding Electrode Flux Coverings. |
A5-ALL |
Package of all A5 Specifications. |
A5.01-93R |
Filler Metal Procurement Guidelines. |
A5.XX.XXXX |
AWS Filler Metal Specifications by Material and Welding Process. |
A5.1M/A5.1 |
Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding. |
A5.10/A5.10M |
Specification for Bare Aluminum and Aluminum Alloy Welding Electrodes and Rods. |
A5.11/A5.11M |
Specification for Nickel and Nickel Alloy Welding Electrodes for Shielded Metal Arc Welding. |
A5.12/A5.12M |
Specification for Tungsten and Tungsten Alloy Electrodes for Arc Welding and Cutting. |
A5.13-00R |
Specification for Solid Surfacing Welding Rods and Electrodes. |
A5.14/A5.14M |
Specification for Nickel and Nickel Alloy Bare Welding Electrodes and Rods. |
A5.15-90 |
Specification for Welding Electrodes and Rods for Cast Iron. |
A5.16-90R |
Specification for Titanium and Titanium Alloy Welding Electrodes and Rods. |
A5.17/A5.17M |
Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding. |
A5.18/A5.18M |
Specification for Carbon Steel Filler Metals for Gas Shielded Arc Welding. |
A5.19-92R |
Specification for Magnesium Alloy Welding Electrodes and Rods. |
A5.2-92R |
Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding. |
A5.20 |
Specification for Carbon Steel Electrodes for Flux Cored Arc Welding. |
A5.21-01R |
Specification for Composite Surfacing Welding Rods and Electrodes. |
A5.22 |
Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding. |
A5.23/A5.23M |
Specification for Low Alloy Steel Electrodes and Fluxes for Submerged Arc Welding. |
A5.24-90R |
Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods. |
A5.25/A5.25M-03R |
Specification for Carbon and Low Alloy Steel Electrodes and Fluxes for Electroslag Welding. |
A5.26/A5.26M-03R |
Specification for Carbon and Low Alloy Steel Electrodes for Electrogas Welding. |
A5.28 |
Specification for Low Alloy Steel Electrodes for Gas Shielded Metal Arc Welding. |
A5.29 |
Specification for Low Alloy Steel Electrodes for Flux Cored Arc Welding. |
A5.3/A5.3M |
Specification for Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding. |
A5.30 |
Specification for Consumable Inserts. |
A5.31 |
Specification for Fluxes for Brazing and Braze Welding. |
A5.32/A5.32M-9 |
Specification for Welding Shielding Gases. |
A5.4 |
Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding. |
A5.5 |
Specification for Low Alloy Steel Electrodes for Shielded Metal ArcWelding. |
A5.6-84R |
Specification for Covered Copper and Copper Alloy Arc Welding Electrodes. |
A5.7-84R |
Specification for Copper and Copper Alloy Bare Welding Rods and Electrodes. |
A5.8/A5.8M |
Specification for Filler Metals for Brazing and Braze Welding. |
A5.9 |
Specification for Bare Stainless Steel Welding Electrodes and Rods. |
A9.1 |
Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases. |
A9.2 |
Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databases. |
API-M |
API 1104 Code Clinic Reference Manual. |
ARE-4 |
Welding Metallurgy. |
ARE-5 |
Design for Welding. |
ARE-6 |
Test Methods for Evaluating Welded Joints. |
ARE-7 |
Residual Stress and Distortion. |
ARE-8 |
Symbols for Joining and Inspection. |
ARE-10 |
Monitoring and Control of Welding and Joining Processes. |
ARE-11 |
Mechanized, Automated, and Robotic Welding. |
ARE-12 |
Economics of Welding and Cutting. |
AWR |
Arc Welding with Robots: Do’s and Don’ts. |
AWS |
Arc Welding and Cutting Safely. |
AWS FMS WC & DC |
Suggested Filler Materials for Welding Structural Steels, Desk Chart and Wall Chart. |
AWS IFS:2002 |
International Filler Metal Classifications. |
AWS PHSP WC & DC |
Suggested Filler Materials and Minimum Preheat Temperatures for Welding Steel Pipe with Wall Thickness Less than 3/4". |
AWS-S |
Seguridad en la Soldadura por Arco. |
AWS WI:2000 |
Welding Inspection Handbook, 3rd Ed. |
|
|
